iVAC 3-Tool Automated Shop Vacuum Dust Collection Set for 1.5 - 10 HP Systems Conquer the dust problem in your workshop with iVAC's automated dust control system! Connect any tool with a dust collection port to iVAC's system and breathe easier! At the heart of iVAC's system is the Pro Switch, which automatically activates your shop vacuum or dust collector when you turn on a power tool that is connected to the system. Each power tool connects to the switch box via a Pro Tool Plus automatic sensor. The Pro Tool Plus senses power via the magnetic field surrounding the tool's power cord and then communicates with the Pro Switch via a wireless signal to turn on the dust collector. System set-up is simple! Just plug the Pro Switch into an outlet and plug the dust collector into the switch. The Pro Tool Plus unit attaches to the power tool cord with a screw-down clamp. Once you connect your power tool to your dust collector, you are ready to go! The main limitation to controlling dust collectors is the start-up current surge, which can be as much as 4 to 5 times the running current and last for several seconds, causing possible damage to the switch box. The included iVAC Contactor solves that problem! The iVAC Contactor is a heavy-duty 3-pole relay housed in an electrical box. Used with a Switch Box or Pro Switch, the Contactor has the ability to withstand surge currents of up to 150 Amps and maintain a running current of up to 40 Amps. Rated to operate at up to 230VAC single-phase or up to 600VAC three-phase, and can control dust collectors up to 10HP (depending on the configuration of the collector). Kit includes the following:
One iVAC Pro Switch S11520-A-NA (20-amp, 115-volt service w/adaptor for 15-amp service)
Three iVAC Pro Tool Plus TP-NA units
One iVAC C115NA Contactor unit (600VAC contact rating; 40Amp carrying current; 150Amp surge current; 120VAC control voltage)
Product Details Brand iVAC Color Yellow Manufacturer iVAC Product Type Vacuum And Dust Collector Accessories Mpn C115NA, S11520-A-NA, TP-NA
Kit comes with 1 Pro Switch, 1 Contactor, and 3 Pro Tool Plus units.
Designed for dust collection systems with up to a 10-HP capacity, depending on the configuration of the dust collector. Runs on standard 15- and 20-amp 115VAC electrical service.
3-pole iVAC Contactor specs include 600VAC contact rating; 40-amp carrying current; 150-amp surge current; and 120VAC control voltage; is suitable for single- or three-phase power. HAVE INSTALLED BY A CERTIFIED ELECTRICIAN.
Pro Switch plugs into standard wall outlet, and dust collector plugs into switch. Switch is activated by signal sent by Pro Tool Plus unit mounted on power tool.
Pro Tool Plus powered by a USB power adapter with a 10' cord.
- Powered by
Returns Accepted for this item if it's within 30 Days